Roundabout Road Additional Pack / Bus&Bicycle-Lane

Uploaded · September 18, 2023

If you liked this item, please rate it up on Steam Workshop page.

Author: adon

Last revision: 13 May, 2023 at 07:06 UTC

File size: 70.76 MB

On Steam Workshop

Description:

English instructions (use DeepL & Google Translate)

This road asset is 1U to 4U Wide / 9-Types packed for roundabouts.
The sidewalks placed inside the roundabout in the Road Builder have been erased so that no road crossings occur.
The zoning is disabled in the Road Editor so it does not obstruct the massing around the connecting road.
Note that this is for right-hand traffic, so if used with left-hand traffic, the sidewalks will be inverted.

Configuration of road assets

Road Builder Version: v1.4.3
Required DLC: DLC After Dark
Asset name in game: Please check below.
1U-Wide: RBR 1W1U Rab Road 1L+B+Bk 2U-Wide: RBR 1W2U Rab Road 2L+B+Bk / RBR 1W2U Rab Road 3L+B+Bk 3U-Wide: RBR 1W3U Rab Road 4L+B+Bk / RBR 1W3U Rab Road 5L+B+Bk / RBR 1W3U Rab Road 6L+B+Bk 4U-Wide: RBR 1W4U Rab Road 6L+B+Bk / RBR 1W4U Rab Road 7L+B+Bk / RBR 1W4U Rab Road 8L+B+Bk
Please check the screenshots for details.
Tunnel support: Not supported (Ground and Elevated only)

About this asset

More types of workshops will be offered, so we are publishing them all together.
The lanes are as close to the outside as possible, and the sidewalks on the inside are replaced with decorations and trees.
The road is designed as a roundabout road, but it can be used for other purposes as well.
Two-way roads with many lanes will have traffic lights, so please disable them using TM:PE or the game’s functionality.

The road width is adjusted by Units, but the zoning disappears when upgraded from other sources.
However, you can continue to maintain the zoning by using the Zoning Adjuster to enforce the zoning.
Using the roundabout batch settings in TM:PE, the settings will be reflected on the roads that connect together.

How to use Asset

Road Builder is only needed to generate roads and is not required for normal play.
The mods and assets required for play are listed in the collection below with a brief description.
Collection Links: https://steamcommunity.com/sharedfiles/filedetails/?id=2896825380

Required Items Subs. ・Road Builder is not required, but please subscribe to AN/TM:PE/IMT. ・Please also subsume the piers and props used on the generated road together. Switching function of AN ・The AN function can be used to switch decorations placed in the road, change curb height, etc. ・The stable version of Network Skins is not yet supported, so please use the beta version when using with AN. Marking of IMT ・IMT markings are automatically generated, so IMT is also included in Required Items. ・If the road was created in v1.0.x or later, the markings will be generated by default and saved on the road itself. Do not subscribe to collections ・If you do not subscribe piers or props, they will not be displayed or will show missing or error in the LSM. ・If the mod is not subscribed, there is no IMT marking/AN switching.

About network problems

Network Errors ・If an error occurs during play, scan the network with Broken Node Detector. ・Corrupt networks can be detected and repaired automatically or manually depending on the item. Simulation Errors ・If a simulation error occurs, try Loading Screen Mod Revisited for recovery mode. ・Hopefully, it will fix the problem and load, but it will almost be deleted and you will have to re-lay it. Using Net Missing Recoverer ・If Net Missing Recoverer is used when an error occurs, it will force replacement with a 2U-wide vanilla road. ・It can be restored, albeit tediously, by changing the road using manual upgrades or RON.

Important Point

If you are unable to install, check the Compatibility Report V2 for mod conflicts.

Underground and Bridge laying ・Underground laying is supported with tunnel textures if the road is generated with v1.4.x or later. ・Bridges are the same as elevated, only with a different network type and slightly different laying conditions. Asymmetric road marking ・Markings rarely match the lane when placed, and markings do not follow together when reversed with upgrades. ・If the markings do not match, use IMT’s edit function to adjust or copy and paste markings from elsewhere. Entrance and exit of vehicles ・If "Can Cross Lane" is enabled, access to the building on the reversed side as seen from the travel lane is possible. ・If invalid, you may not be able to enter or exit the building on the other side and may not be able to reach or take a detour. Multi-lane road asset ・Intersections are prone to congestion, so it is recommended that TM:PE be used to control vehicle routing. ・Check the travel route and adjust it using TM:PE to control intersections and change the course of intersections. Textures at intersections are wrong ・Combinations of connecting roads and narrow sidewalks may lack or collapse textures. ・If you experience texture problems, increase the size of intersections and seams with NCR or NC2.

[ko-fi.com]