[RF] SD Force Main Outlet
SD Force Main Outlet by [SSU]yenyang
Dumps storm water from the storm drain system. Does not require gravity flow but requires electricity.
Outlet Capacity: 15000 units
Cost: 3750
Upkeep: 320/week
Electricity: 240 KW
By default SD Force Main Outlets snap to shorelines and canals.
If you hold ALT while placing one then you can place it anywhere.
Must be connected to your sewer and water system but only uses 1 water and 1 sewer. Does not dump sewage. It does not contribute to the water or sewage because storm drain water is kept separate.
Storm Drain Inlets and Pumps direct any storm water that is collected to Underground Detention Basins within the same district first, and then to Gravity Storm Drain Outlets and SD Force Main Outlets in the same district once the Detention Basins have reached 80% filled. Anything not included in a district is actually in District 0.
Line Not Connected – You don’t have any inlets in the same district. Add an inlet in this district or move the outlet to another district with an inlet.
Landfill Full – There is not enough outlet capacity within this district. Build additional outlets or wait for the storm to lessen.
See Official Rainfall Guide for more details about the Rainfall Mod
Special Thanks to Snow_Cat because without Asset AI Changer & Asset UI Priority Changer, the storm drain assets would not have been possible.
If you liked the mod don’t forget to give it a Thumbs Up Rating!
If you loved the mod don’t forget to make it a Favorite!
The Buttons for these are under the slideshow.
