北京內城城牆(可拉式) | 北京内城城墙 | Beijing Inner City Wall (draggable)

If you liked this item, please rate it up on Steam Workshop page.

Author: Emperor Li

Last revision: 22 Dec, 2017 at 16:27 UTC

File size: 5.19 MB

On Steam Workshop

Description:

(English description below)

同高架人行道,市民可在城牆上行走,含橋部分
位於人行道選單下

城牆附件請到此處訂閱。

幾個須知項目:

  • 請先鏟平地面
  • 高度可自行調整,建設最高高度12m,建設過高城牆會變成懸空狀態
  • 內不包含夜燈
  • 強烈建議使用Move it!微調
  • 交叉​口地板部份貼圖會有扭曲,所以不建議製作複雜的交叉​口
  • 原模型長為4格(32m),拉過長的距離時城垛和橋墩也相對會過寬,請在適當地方加入節點,減少城(橋)段距離

同高架人行道,市民可在城墙上行走,含桥部分
位于人行道菜单下

城墙附件请到订阅。此处订阅。

几个须知项目:

  • 請先铲平地面
  • 高度可自行调整,建设最高高度12m,建设过高城墙会变成悬空状态
  • 内不包含夜灯
  • 强烈建议使用Move it!微调
  • 交叉口地板部份贴图会有扭曲,所以不建议制作复杂的交叉口
  • 原模型长为4格(32米),拉过长的距离时城垛和桥墩也相对会过宽,请在适当地方加入节点,减少城(桥)段距离

same as elevated pedestrian path, Cims can walk atop the wall, including bridge segment.
Can be found under pedestrian path menu.

Visit here to subscribe to city wall accessories.

some notes:

  • Please flatten the terrain first.
  • wall heights adjustable, max height 12m, above 12m you’ll get floating wall.
  • night lights not included.
  • strongly recommend using Move it! to adjust
  • texture error occurs when building junction. So it’s not recommended to build complicated junctions.
  • segment length is 4 tiles (32m). Dragging longer segments will stretch the battlement and bridge pillars, which looks weird when overstretching. Please add nodes in order to shorten the segment.

For Parklife owner: add tour to attract cims to walk on the wall
有Parklife的玩家:加旅遊路線來吸引市民來城牆上行走

Enjoy!
——————————————————————————————————————————
Tags: chinese architecture, fortification, Great Wall, City Wall, China, Beijing, Peking, 北京, 中國傳統建築, 中国传统建筑, 中式, 中國風, 中国风, 城牆, 城門, 城墙, 城门

by Emperor Li