Transit Hub Roundabout III

This is an extra-large (24-cell diameter) roundabout with a multi-mode transit hub embedded in the center. Out of the box, it supports buses, trams, monorail/elevated-rail, and subways/underground-rail. In addition, on the theory that a transit hub should be a pleasant place to be, there is room in the center for a 4×4 park connecting the train and bus stations.

This transit hub makes use of several custom MODs and assets (listed below) that range from absolutely required to optional extra.

You can just plop the hub and run. But, to get the best results, you’ll need to use the Traffic Manager mod to configure the road network. To that end, I’ve got basic instructions listed below with references to accompanying pictures.

A detailed set of instructions can be found at https://steamcommunity.com/sharedfiles/filedetails/?id=2779466322.

---

• Left-Hand 2-Lane Road with Dedicated Tram — for Transit Hubs
• Tram Tracks with Trees
• Network Extensions 2
  • Note: If you don’t wish to install Network Extensions 2, then take a look at my Transit Hub Roundabout III (Vanilla) asset.

• Fine Road Anarchy 2.0.2
• TM:PE V11 STABLE (Traffic Manager: President Edition)

• 2×2 Roadless Fountain
• 4 Lane Road with Trams and Bikes
• City Fountain 3×3
• Crossings
• Hide TMPE crosswalks V3.0 [stable]
• Humble Fountain (1×1)
• Nonstop Bus Terminal (5-Bay)
• Transit Hub Roundabout Plaza

---

This is a quick-reference set of instructions. Full instructions can be found at https://steamcommunity.com/sharedfiles/filedetails/?id=2779466322.

1. Plop the Roundabout
2. Modify the Roads
   • Use Fine Road Anarchy to protect the pedestrian paths.
3. Connect Pedestrian Paths
4. Add Crosswalks
5. Plop Buildings and Parks
   • Use Fine Road Anarchy to protect the pedestrian paths.
6. Add Non-Road Connections
7. Restrict Road Access
8. Configure Lane Connections
9. Remove Crosswalks and Traffic Lights
10. Add Transit Stops