XBRT Elevated Module(DIY Pedestrian Deck) 厦门BRT

Actually elevated bus system. This is an elevated bus station with customizable pedestrian deck.
厦门快速公交高架部分是鲜有的完全独立路权、全程在高架桥上行驶的特色“轨道交通”，其中部分公交高架区间是由普通高架桥改造而来的。

Don’t forget to subscribe to

>>Elevated bus stop
>>Modified pedestrian deck
>>Platform screen doors(PSD) ready

>>Semi-transparent PSD.
>>PSD will open after placing a bus stop in the station.
>>The size of PSD fits almost all buses both on workshop and in vanilla, including articulated ones.
>>The size of the pillars fits NE2 and CSUR , so that you can definitely place the station in the center of the roads.
>>For detailers, ”prop” set in the 3D model may let you down. There is no props in this asset(but ten lights), so that you could DIY. For example, you could PO add animated station displays or modern station signs and whatever you want.

>>Attachment is the key to this elevated station. Pedestrian paths attached to vehicle lanes have no nodes at crossings, you’ll have to drag the pedestrian node, build another pedestrian deck from the middle of the existing one to create nodes and delete the no-node segments if you want a pedestrian crossing.
>>To upgrade the pedestrian paths into workshop versions, you don’t have to subscribe to Touch this. Using Move It to delete the existing ones and press Ctrl + Z should work as well.
>>When placing bus lines, the roads will be hidden by the roof of the building so that you may
have to change the position of your camera. There are four bus stops in the station. Buses with
a length less than 24m as well as normal doors should look fine in this station.
>>In order to realize both elevated bus stop and functional PSDs, the station roads are not elevations but basic ones. That is to say, if you want to make it a tram station, you’ll need Fine road tool or Elevated Stops Enabler . Because of this feature, you can just delete the four-lane road underneath the station and make a side elevated bus stop. Only your sidewalk will absorb the terrain.

Xiamen elevated BRT System was designed according to the LRT standard. In Xiamen, overpass bus lines are realized by dispatchers. As a result, it’s a two-lane road system with 2 stops on each side in a normal station.

XBRT 12m
XBRT 12m Electric
XBRT 18m
XBRT 18m Electric

If you can’t wait to see more assets of XBRT, guys, just rate it.